Mech Engineering Drawing-MED Skip to main content

TERMS

Terms and Conditions

Welcome to MECHANICAL ENGINEERING DRAWING!

These terms and conditions outline the rules and regulations for the use of MECHANICAL ENGINEERING DRAWING's Website, located at https://mechengineeringdrawing.blogspot.com.

By accessing this website we assume you accept these terms and conditions. Do not continue to use MECHANICAL ENGINEERING DRAWING if you do not agree to take all of the terms and conditions stated on this page.

The following terminology applies to these Terms and Conditions, Privacy Statement and Disclaimer Notice and all Agreements: "Client", "You" and "Your" refers to you, the person visits or log on this website and compliant to the Company’s terms and conditions. "The Company", "Ourselves", "We", "Our" and "Us", refers to our Company. "Party", "Parties", or "Us", refers to both the Client and ourselves. All terms refer to the offer, acceptance and consideration of payment necessary to undertake the process of our assistance to the Client in the most appropriate manner for the express purpose of meeting the Client’s needs in respect of provision of the Company’s stated services, in accordance with and subject to, prevailing law of Netherlands. Any use of the above terminology or other words in the singular, plural, capitalization and/or he/she or they, are taken as interchangeable and therefore as referring to same.

Cookies

We employ the use of cookies. By accessing MECHANICAL ENGINEERING DRAWING, you agreed to use cookies in agreement with the MECHANICAL ENGINEERING DRAWING's Privacy Policy.

Most interactive websites use cookies to let us retrieve the user’s details for each visit. Cookies are used by our website to enable the functionality of certain areas to make it easier for people visiting our website. Some of our affiliate/advertising partners may also use cookies.

License

Unless otherwise stated, MECHANICAL ENGINEERING DRAWING and/or its licensors own the intellectual property rights for all material on MECHANICAL ENGINEERING DRAWING. All intellectual property rights are reserved. You may access this from MECHANICAL ENGINEERING DRAWING for your own personal use subjected to restrictions set in these terms and conditions.

You must not:

  • Republish material from MECHANICAL ENGINEERING DRAWING.
  • Sell, rent or sub-license material from MECHANICAL ENGINEERING DRAWING.
  • Reproduce, duplicate or copy material from MECHANICAL ENGINEERING DRAWING.

This Agreement shall begin on the date hereof.

Parts of this website offer an opportunity for users to share posts & to exchange opinions and information in certain areas of the website. MECHANICAL ENGINEERING DRAWING does filter, edit, publish or review Comments prior to their presence on the website. Comments do reflect the views and opinions of MECHANICAL ENGINEERING DRAWING, its agents and/or editors. Comments reflect the views and opinions of the person who post their views and opinions. To the extent permitted by applicable laws, MECHANICAL ENGINEERING DRAWING shall not be liable for the Comments or for any liability, damages or expenses caused and/or suffered as a result of any use of and/or posting of and/or appearance of the Comments on this website.

MECHANICAL ENGINEERING DRAWING reserves the right to monitor all Comments and to remove any Comments which can be considered inappropriate, offensive or causes breach of these Terms and Conditions.

You warrant and represent that:

  • You are entitled to post the Comments on our website and have all necessary licenses and consents to do so;
  • The Comments do not invade any intellectual property right, including without limitation copyright, patent or trademark of any third party;
  • The Comments do not contain any defamatory, libelous, offensive, indecent or otherwise unlawful material which is an invasion of privacy
  • The Comments will not be used to solicit or promote business or custom or present commercial activities or unlawful activity.

You hereby grant MECHANICAL ENGINEERING DRAWING a non-exclusive license to use, reproduce, edit and authorize others to use, reproduce and edit any of your Comments in any and all forms, formats or media.

Hyperlinking to our Content

The following organizations may link to our Website without prior written approval:

  • Government agencies;
  • Search engines;
  • News organizations;
  • Online directory distributors may link to our Website in the same manner as they hyperlink to the Websites of other listed businesses; and

These organizations may link to our home page, to publications or to other Website information so long as the link: (a) is not in any way deceptive; (b) does not falsely imply sponsorship, endorsement or approval of the linking party and its products and/or services; and (c) fits within the context of the linking party’s site.

We may consider and approve other link requests from the following types of organizations:

  • commonly-known consumer and/or business information sources;
  • community sites;
  • associations or other groups representing charities;
  • online directory distributors;
  • internet portals;
  • accounting, law and consulting firms; and
  • educational institutions and trade associations.

We will approve link requests from these organizations if we decide that: (a) the link would not make us look unfavorably to ourselves or to our accredited businesses; (b) the organization does not have any negative records with us; (c) the benefit to us from the visibility of the hyperlink compensates the absence of MECHANICAL ENGINEERING DRAWING; and (d) the link is in the context of general resource information.

These organizations may link to our home page so long as the link: (a) is not in any way deceptive; (b) does not falsely imply sponsorship, endorsement or approval of the linking party and its products or services; and (c) fits within the context of the linking party’s site.

If you are one of the organizations listed in paragraph 2 above and are interested in linking to our website, you must inform us by sending an e-mail to MECHANICAL ENGINEERING DRAWING. Please include your name, your organization name, contact information as well as the URL of your site, a list of any URLs from which you intend to link to our Website, and a list of the URLs on our site to which you would like to link. Wait 3-4 weeks for a response.

Approved organizations may hyperlink to our Website as follows:

  • By use of our corporate name; or
  • By use of the uniform resource locator being linked to; or
  • By use of any other description of our Website being linked to that makes sense within the context and format of content on the linking party’s site.

No use of MECHANICAL ENGINEERING DRAWING's logo or other artwork will be allowed for linking absent a trademark license agreement.

iFrames

Without prior approval and written permission, you may not create frames around our Webpages that alter in any way the visual presentation or appearance of our Website.

Content Liability

To the maximum extent permitted by law, in no event shall https://mechengineeringdrawing.blogspot.com or our suppliers be liable to you or any third-party for any lost profits, lost data, costs of procurement of substitute products, or any indirect, consequential, exemplary, incidental, special or punitive damages arising from or relating to these terms or your use of, or incapability to use the site even if https://mechengineeringdrawing.blogspot.com has been advised of the possibility of such damages.  Access to and use of the site is at your own discretion and risk, and you will be solely responsible for any damage to your device or computer system, or loss of data resulting therefrom.

Your Privacy

Please read Privacy Policy

Reservation of Rights

We reserve the right to request that you remove all links or any particular link to our Website. You approve to immediately remove all links to our Website upon request. We also reserve the right to amen these terms and conditions and it’s linking policy at any time. By continuously linking to our Website, you agree to be bound to and follow these linking terms and conditions.

Removal of links from our website

If you find any link on our Website that is offensive for any reason, you are free to contact and inform us any moment. We will consider requests to remove links but we are not obligated to or so or to respond to you directly.

We do not ensure that the information on this website is correct, we do not warrant its completeness or accuracy; nor do we promise to ensure that the website remains available or that the material on the website is kept up to date.

Disclaimer

To the maximum extent permitted by applicable law, we exclude all representations, warranties and conditions relating to our website and the use of this website. Nothing in this disclaimer will:

  • limit or exclude our or your liability for death or personal injury;
  • limit or exclude our or your liability for fraud or fraudulent misrepresentation;
  • limit any of our or your liabilities in any way that is not permitted under applicable law; or
  • exclude any of our or your liabilities that may not be excluded under applicable law.

The limitations and prohibitions of liability set in this Section and elsewhere in this disclaimer: (a) are subject to the preceding paragraph; and (b) govern all liabilities arising under the disclaimer, including liabilities arising in contract, in tort and for breach of statutory duty.

As long as the website and the information and services on the website are provided free of charge, we will not be liable for any loss or damage of any nature.

Marked Valuable Posts!

IMPORTANT SHORT QUESTIONS AND ITS ANSWERS FROM ENGINEERING DRAWING INSTRUMENTS

  ●  Fill in the blanks type Questions :   1.  The full form of BIS is ……………………… Ans:  Bureau of Indian Standard. 2.  The inclination of inclined lettering as per BIS is ……………………. Ans:  75° 3.  Set squares are used for drawing ……………………. lines. Ans:  Parallel [ Vertical, Horizontal, Inclined ]. 4.  Angle of multiple of as constructed by the combined use of …………… & ………….. Ans:  T-SQUARE & SETS SQUARE. 5.  In the absence of protractor, ………………………. Is used to measure angles. Ans:  Angle of Chords. 6.  The scale of chords is used to measure ……………………….. Ans:  Angles. 7.  Two methods/systems to represent the dimensions are …………………. and …………….. system.  Ans:  Aligned and Unidirectional. 8.  Lettering is usually done in ……………….. letters. Ans:  Capital. 9.  The size of the letter is described by its ………………………….  Ans:  Height. 10.  Single stroke letters may be either …………………… or ………………………… Ans:  Vertical or Inclined. 11.  The dimension line should not ………………………. each other. Ans:  Cross / I
Post a Comment
Read more

LAYOUT OF BORDERS AND TITLE BLOCK ON DRAWING SHEET

Post Summarization: ● Introduction. ● Size of drawing sheets. ● Margin. ● Borderlines. ● Title block. ● Rules for selecting Titles. ● Revision Table. ● Notes. ● Tutorial Videos (Coming Soon!) INTRODUCTION: A drawing sheet consists of an engineering drawing and must have some other aspects too i.e. Border lines, Title block, Notes, etc for better demonstration of the drawing. The layout of border lines and title blocks should always be done in some specific manner on the drawing sheet as it's not only a necessity for increasing the visual orientation of the drawing sheets, moreover, these help to read the drawing sheet more speedily in a systematic way. SIZE OF THE DRAWING SHEET: The size of the drawing sheet in detail can be found in the  TECHNICAL DRAWING AND INSTRUMENTS of this blog. MARGIN: Margin or Marginal lines are drawn on the drawing sheet only where the untrimmed size of the drawing sheet is provided. Generally, in the paper industry, trimmers are used to trim drawing sh
Read more

IMPORTANT SHORT QUESTIONS & ITS ANSWERS ON CURVE & LOCI

IMPORTANT SHORT QUESTIONS : 1.  A locus is the path of a point which moves in ……………………… Ans:  Same plane. 2.  When the section plane is inclined to the axis and is parallel to one of the generators, the section is a ………………… Ans:  Parabola. 3.  When the section plane is inclined to the axis and cuts all the generators, on one side of the apex, the section is an ……………….. Ans:  Ellipse. 4.  When the section plane cuts both the parts of the double cone on one side of the axis, the section is ……………. Ans:  Hyperbola. 5.  If eccentricity (e) of a curve is equal to 1, the curve is said to be ………………. Ans:  Parabola. 6.  If eccentricity (e) of a curve is less than 1, the curve is said to be ………………. Ans:  Ellipse. 7.  If eccentricity (e) of a curve is greater than 1, the curve is said to be …………. Ans:  Hyperbola. 8.  The ………… is the point at which the conic cuts the axis. Ans:  Apex / Vertex. 9.  The ………….. is the point at which the generator cuts the axis. Ans:  Apex / Vertex. 10.  The point at
Read more

LETTERING

 LETTERING: INTRODUCTION Writing titles on drawing sheets, dimensions on drawing objects, special notes, and other important particulars on a drawing is called Lettering. It is a very important step in an engineering drawing. Lettering should, therefore, be done properly in a clear, legible, and uniform style. It should be in plain and simple style so that it could be done freehand and speedily. Any ornamental style must be avoided lettering in engineering drawings. Though accurate and neat drawings may be drawn yet sometimes, their appearance is spoiled by ornamental lettering or sometimes, their usefulness is decreased by poor lettering.   Note:  The use of drawing instruments in lettering takes considerable time and hence, it should be avoided to save time, especially in the examination hall. Efficiency in the art of lettering can be achieved by careful and continuous practices. **Actually, a free hand drawing means, "keeping almost the same visual shape, you can draw any comp
Read more

IMPORTANT! Short Questions and Answers from SCALE

  IMPORTANT SHORT QUESTIONS AND ANSWERS FROM SCALE 1. An instrument used to measure the length or distance between two objects or points, termed as.................. Ans: Scale. 2. The scale of chords is used to measure ……………………….. Ans: Angles. 3. The ratio of drawing length to the actual length of an object is called ………………………. Ans:   Representative Fraction. 4. When measurements are required in two units or a unit and its subdivision, the ………………… is used. Ans:   Plain scale. 5. When measurements are required in three units, the …………………. Scale is used. Ans:   Diagonal. 6. When a drawing is drawn of the same size as that of the object, the scale used is …………………. Ans: Full-size  scale   7. When drawings are drawn smaller than the actual size of the object, the scale is said to be ………….. Ans:   Reducing scale 8.   R.F. is the ratio of .................................. to the .................................. Ans: Drawing Length of an object, Actual Length of that object. 9.
Read more

INTRODUCTION OF ENGINEERING DRAWING

INTRODUCTION OF ENGINEERING DRAWING Simply you can say, it is a special type of language globally used for engineers or technical persons to communicate between them for fulfillment of target or making any geometrical shaped object or rather say any project. Suppose, there is a building or bridge construction or maybe the construction of an electric or power substation, or maybe in a mechanical workshop, we need various types of technical persons or specialists for construction or production. As an example, some engineers ensure the stability of load capacity of the ground and how much load can bear that ground by doing the field survey, some technical persons or engineers develop the structure or construction, and some technical person completes the fabrication ( i.e. riveting or welding ) portions, some technical persons or engineers develop the electrical supply connections and so on. All technical persons and engineers come together to complete a project or projects but they all n
Read more

SCALE

INTRODUCTION TO SCALE :   Scales are made of wood, steel, celluloid plastic, or cardboard. 15 cm long and 2 cm wide or 30 cm long and 3 cm wide level scales are in Common use. They are ordinarily around 1 mm thick. However, a  15 c.m. long and 2 c.m. wide scale is considered a Standard length of scale.  By using scale, small components can be drawn with the same size as the components are actually. A 150 mm long pen or 175 mm long pencil may be shown by a drawing of 150 mm length or 175 mm length respectively. Drawings of the same size as the objects are called full-size drawings and ordinary full-size scales are generally used to draw such drawings. A scale is determined by the ratio of the dimensions of an element as represented in a drawing to the actual dimensions of the same element. This is called R.F. or Representative Fraction of Scale. The scales are generally classified as : (1) Plain scales (2) Diagonal scales (3) Vernier scales (4) Comparative scales (5) Scale of chor
Read more

TECHNICAL DRAWING AND INSTRUMENTS

What is Technical Drawing? What is the necessity of Technical Drawing?  Technical drawing or drafting, is the demonstration and discipline of composing drawings that visually communicate how something capacities or is developed. Technical drawing is basic for imparting thoughts in industry and engineering. To make the drawings more clear, individuals use familiar symbols, perspectives, units of measurement, notation systems, visual styles, and page design. Together, such conventions constitute a visual language and help to guarantee that the attraction is unambiguous and moderately straightforward. A large number of the images and standards of Technical drawing are systematized in an international standard called ISO 128.  The requirement for exact correspondence in the arrangement of a practical record recognizes specialized drawing from the expressive drawing of the visual expressions. Creative drawings are emotionally deciphered; their implications are duplicated and decided. Specia
Read more